LAM-VN 18.38
ELECTRIC FORCED AIR OVEN FOR VACUUM LAMINATING OF FLAT AND CURVED GLASS Ask For Information
Oven with tubular structure, internal infill paneling in galvanized sheet metal, external paneling in pickled and painted sheet metal, equipped with internal insulation in rigid panels of high density rock wool, with low accumulation and thermal conductivity.
Furnace composed of 1 chamber with heating and ventilation section located under the lower working level for an optimal circulation of hot air, control of the lamination process and temperature.
Oven equipped with
- n.01 vertical opening door with counterweights
- n.04 working plans complete with silicone bag, nets, vacuum valves, pipes and quick couplings with viton seal (n.1 plan for each trolley)
- finned armoured resistors positioned in the rear heating section
- n.02 fans
- vacuum system complete with 1 pump and accessories
- n.01 Panel complete with SIEMENS programmer with router for remote assistance
- n.01 Hydraulic lifter for the loading and unloading process of each single work surface (each surface is moved individually)
- n.01 Trolley for n.02 Film rolls
Technical details:
- – no. 04 silicone bags (mm) 2000 x 4150
- – no. 04 nets (mm) 1800 x 3000
- – no. 08 vacuum valves for silicone bag complete with hose
- – Pump 150 m3 : Kw 3
- – Resistance power: Kw 40.50
- – n.03 fans: Kw 2,20 each.
- – n.01 hydraulic lift: Kw 1,50
- – Operating temperature: 0-200°
The width of the workable sheet depends on the thickness of the glass; if the thickness of the glass increases, the width of the workable sheet decreases.
We reserve the right to make improvements to the products without notice.